Optical Access — Huawei OptiXaccess
Huawei OptiXaccess EA5801S-FL16
The Huawei OptiXaccess EA5801S-FL16 is a compact outdoor blade OLT. It provides 16 Flex-PON ports to support FTTH coverage in remote areas, evolution from cable networks to FTTH networks.
High Density with 16 Flex-PON Ports
Provides 16 Flex-PON service ports, and can work with different optical modules to implement hybrid access of GPON, XGS-PON, and GPON Combo.
Pre-connected Without Splicing
The end-to-end pre-connection makes devices plug-and-play and eliminates the need of fiber splicing.
Light and Compact
The device weighs no more than 15 kg and has a volume of only 12 L. A single person can install the device.
Specifications
| Dimensions (H x W x D) (mm) | 400 x 300 x 120 |
|---|---|
| Weight | About 15kg |
| Power supply mode | • DC power supply • AC power supply |
| Rated voltage | • DC power supply: –48 V to –60 V • AC power supply: 100 V–240 V |
| Maximum input current | • DC power supply: 6 A • AC power supply: 2.5 A |
| Protection rating | IP65 |
| Surge protection level | • AC power port: 20 kA in difference and common modes • DC power port: 10 kA in differential mode and 20 kA in common mode |
| Operating temperature | –40°C to +50°C (with solar radiation); minimum startup temperature: –25°C |
| Operating humidity | 5% RH to 95% RH |
| Atmospheric pressure | 70 kPa to 106 kPa |
| Altitude | • Below 4000 m • NOTE • The air density varies with the altitude, which affects the heat dissipation • capability of devices. Therefore, the operating temperature of the device • changes with the altitude. |
| System switching capacity | 460 Gbit/s |
| MAC addresses | 32767 |
| Access ONT | 2048 |
| IPv4 routing table | 8192 |
| IPv6 routing table | 4096 |
| ARP table | 16384 |
| 10GE/GE upstream ports | 4 |
| Service ports | 16 Flex-PON |
| Power consumption | • Static Power Consumption: DC power supply: 64 W AC power supply: 65 W • Typical Power Consumption: DC power supply: 115 W AC power supply: 120 W • Maximum Power Consumption: DC power supply: 132 W AC power supply: 135 W • NOTE • The power consumption of the device is calculated based on the following conditions: Static power consumption: 25°C, no optical module in any optical port, and no service running. Typical power consumption: 25°C, 4 x 10GE upstream transmission, 16 x XGS COMBO ports, full service configuration, and full traffic. Maximum power consumption: 50°C, 4 x 10GE upstream transmission, 16 x XGS COMBO ports, full service configuration, and full traffic |
Documents
In the same family
Huawei SmartAX MA5800 SeriesThe product is designed to help ISPs build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver better service experience.
Huawei SmartAX MA5801 Series
Huawei OptiXaccess EA5801E
Huawei SmartAX EA5800 Series
Huawei OptiXaccess S1016-L
Huawei OptiXaccess EA5801E-FL16