Optical Terminal — Huawei OptiXstar
OptiXstar P885E
OptiXstar P885E is a rack-mounted PoE ONU. It provides two XGS-PON Pro upstream ports on the network side and 24 2.5GE (PoE+) ports on the user side. It is suitable for carrying data, video and AP services in high-density campus scenarios and brings high-quality service experience to users.
Ultra Wide Access
High Reliability，High Security
Easy O&M
Specifications
| Dimensions(WxDxH) | 442mm×240mm×43.6mm(Without Mounting Brackets) 482mm×240mm×43.6mm (With Mounting Brackets) |
|---|---|
| Rated operating voltage range | 100–130 V AC, 50 Hz/60 Hz, 12A 200–240 V AC, 50 Hz/60 Hz, 8A |
| NNI | 2*XGS-PON Pro (BOB), compatible with XGS-PON |
| UNI | 24*2.5GE, supports PoE+ |
| Static power consumption | 31.5 W |
| Maximum power consumption | 834.1W |
| Installation mode | The device can be placed horizontally on a desk, installed in a network box, or installed in a 19- inch rack. |
| Operating temperature | -10°C to +55°C |
| Heat dissipation mode | Fans heat dissipation |
| PoE output power | Maximum output power of a PoE+ port: 30 W Maximum total output power: 720W |
| PON | • Port mode: XGS-PON Pro − Port type: SC/UPC − Transmission rate: RX 12.44 Gbit/s, TX 12.44 Gbit/s − Optical receiver sensitivity: -22 dBm − Overload optical power: -7 dBm • Port mode: XGS-PON − Port type: SC/UPC − Transmission rate: 9.953 Gbit/s in the uplink and 9.953 Gbit/s in the downlink − Receiver sensitivity: -28 dBm − Overload optical power: -8 dBm |
| 2.5GE | • PoE+ • Port type: RJ-45 • Auto ports speed(10/100/1000/2500 Mbit/s) • Half-duplex/full-duplex mode negotiation and configuration • Auto-MDI/MDIX • Configuration of the number of MAC addresses learned • VLAN filtering |
| Networking Protection | • Type B single-homing protection • Type B dual-homing protection • Type C single-homing protection • Type C dual-homing protection • PON upstream load sharing |
| Security | • MAC authentication, 802.1x authentication, MAB authentication, and dynamic delivery of userpolicies (VLAN and ACL) • DoS/ARP anti-attacks • Static MAC addressbinding • Device access control |
In the same family
Huawei OptiXstar P885E-10
Huawei OptiXstar S800EThe OptiXstar S800E is a miniature ONU that can be inserted into the SFP port of a camera or AP to provide XGS-PON access for video or wireless backhaul.
OptiXstar P802P
Huawei OptiXstar P892M-01
Huawei OptiXstar P892M-02
Huawei OptiXstar E853E
OptiXstar P882E
OptiXstar P803L