Enterprise Routers
NetEngine AR5710I-RU-NRGL
New 5G remote unit (RU) model : comes with dustproof and waterproof design; supports 5G; supports both co-deployment and independent deployment; can be mounted on a pole, wall, and desk; delivers a 5G air interface forwarding performance of 5.4 Gbps.

Flexible Deployment
- Independent deployment & Co-deployment
- Diverse Installation Modes (Desk, Pole and Wall-Mounted)
- Flexible Indoor & Outdoor Deployment
5G Ultra-Broadband
- Carrier aggregation: DL 3CC & UL 2CC
- Peak rate: uplink 500 Mbps; downlink 5.4 Gbps
- Supports 5G, compatible with 4G
- 2 x SIM cards (active/standby)
Industrial Design
- Fanless
- IP rating:IP65
- Operating temperature: -40°C to 65°C (altitude: < 5000 m)
- Power supply mode: PoE/PoE Adapter
Specifications
| Forwarding performance (NAT+ACL+QoS, IMIX) | 1.5 Gbps |
|---|---|
| IPv4 Forwarding performance (512 bytes) | 13 Gbps |
| IPSec performance (512 bytes) | 1 Gbps |
| SD-WAN IPsec performance* (512 bytes) | 1.7 Gbps |
| SD-WAN performance** (512 bytes) | 1.4 Gbps |
| SD-WAN typical performance*** (512 bytes) | 1 Gbps |
| Fixed ports**** | 1 x 2.5GE electrical, 1 x 10GE SFP+ |
| Build-in LTE/5G | 5G SA/NSA, 2 x SIM cards (active/standby) |
| 5G RU | Supported |
| Switch RU | Supported |
| WAC (Number of managed APs,default/maximum*****) | 16/64 |
| PoE in | PoE power supply/PoE Adapter |
| Antennas | Built-in 5G/LTE antennas |
| Console port | USB 3.0 Type A |
| USB port | 1 x USB 2.0 |
| Memory | 4 GB |
| Dimensions without packaging (H x W x D) | 80.0 mm x 240.0 mm x 200.0 mm |
| Weight without packaging | 2.21 kg |
| Installation mode | Installed on a pole, wall, or desktop |
| IP rating | IP65 |
*: Scenario where the SD-WAN performance specification applies: IPsec. This specification applies to the combined total of traffic in inbound and outbound directions. Manual switching to the routing mode is required.**: Scenario where the SD-WAN performance specification applies: IPsec + QoS. This specification applies to the combined total of traffic in inbound and outbound directions. Manual switching to the routing mode is required.***: Scenario where the typical SD-WAN performance specification applies: IPsec + QoS + SA + AppFlow. This specification applies to the combined total of traffic in inbound and outbound directions. Manual switching to the routing mode is require****: All fixed ports are LAN ports by default and can be switched to WAN ports. *****: By default, a maximum of 16 APs can be managed for free. If the number of APs exceeds 16, licenses must be purchased. NetEngine AR5710I-RU-NRGL supports a maximum of 64 APs.
Documents
In the same family
NetEngine AR8000 Series Enterprise Routers
NetEngine AR6700 Series Enterprise Routers
NetEngine AR5710-S Series Enterprise Routers
NetEngine AR5710-H Series Enterprise Routers
NetEngine AR6100 Series Enterprise Routers
NetEngine AR650 Series Enterprise Routers
NetEngine AR630 Series Industrial RoutersSD-WAN performance: 120 Mbit/s
NetEngine AR610 Series Enterprise Routers